ConServ 800 FIBERGLASS REBAR is a structural spiral wrapped fiberglass reinforcing rod which is corrosion resistant, non-conductive and lightweight while it is one-fourth the weight of steel rebar. It more closely matches the characteristics of wood for modulus of elasticity, expansion and contraction, and condensation than does typical steel reinforcing rod. USES For making load bearing connections, pinning
and reinforcing wood and concrete elements. Typical applications
include attachment and reinforcement of rafters, trusses, purlins, framing
members, beams, sills, columns, logs, timbers, etc. It can be used
for casting wood and concrete elements and to replace steel rebar in
concrete slabs, forms and beams. Fiberglass rebar can also be
used in conjunction with ConServ's New
Structural Epoxies in Caulkable Cartridges for attaching the rebar to the elements and the elements to one
another. Call for details and information.
PROPERTIES
Continuous drawn glass roving saturated with vinyl ester
resin. A single strand, spiral wrapped around the exterior diameter
to provide a spiral indentation in the bar providing maximum bonding and
lock to epoxy, concrete or grout bedding.
SIZE AVAILABILITY
All diameters are shipped in convenient 5 ft. lengths to
facilitate UPS handling. Longer lengths are available by special
order up to 20 ft.
NOTE: For specific assistance in determining which diameter is most appropriate for an application refer to the Design Calculation Worksheet. ConServ Fiberglass Rebar 800 [ HOME | Technical Data | Specifications ] All ConServ Products |
ConServ Epoxy LLC © All Rights Reserved