TECHNICAL DATA

ConServ 600 STRUCTURAL EPOXY REPAIR is a high strength, multipurpose adhesive designed for structural repair applications in wood.  As it comes from the container it is suited to be used as a heavy duty structural consolidant.  When mixed with washed sand and or fine aggregate it can be used to make structural repairs to load bearing members or connections.  ConServ 800 rebar can further add to the versatility and effectiveness of structural repairs using this material.  Depending on the mixture, this epoxy can be poured, brushed, sprayed, puttied, cast or molded to the affected area.  Typical applications include reinforcing and casting purlins, rafters, joists, beams, columns and sills.

MIXING

Combine equal volumes of part A (epoxy resin) and part B (curing agent) and blend thoroughly for 3 minutes using a power mixer.  When used as a mortar or epoxy concrete, combine washed sand/or fine aggregate at a ratio of 3 parts epoxy to 9 parts filler by volume.  A thixotropic material such as fumed silica available from ConServ may be used as a thickener to prevent stratification/separation of fillers.

CURE SCHEDULE

Pot life Gel time Final cure

100 cc mass - 1 hour @ 77º F. 100 cc mass - 4-6 hours @ 77º F. 2-5 days @ 77º F. (approx. 75% ultimate strength) DO NOT use below 50º F. AVOID exposure to intense sunlight until final cure is complete.

PROPERTIES

Color Viscosity Operating range Mixing temp. range Shelf life

Amber 500 cps @ 75º F. -20º F. to 85º F. 50º F. to 85º F. 1 year in unopened original containers

STORAGE CONDITIONS

Store at room temperature.  DO NOT allow to freeze.  Keep containers closed.

PACKAGING & YIELD

ConServ 600 comes in 2 qt., 2 gal., and 10 gal. sets (A & B):

2 Quart set yields -	approx. 0.07 cu ft without fillers approx. 0.0135 - 0.40 cu ft with aggregate added
2 Gallon set yields -	approx. 0.27 cu ft without fillers approx. 0.54 to 1.6 cu ft with aggregate added
10 Gallon set yields -	approx. 0.27 cu ft without fillers approx. 2.7 - 8.0 cu ft with aggregate added