Flexible Epoxy Patch 200 - Material Safety Data Sheet

M.S.D.S.

MATERIAL SAFETY DATA SHEET
3/29/94
Flexible Epoxy Patch 200

Product Identification

Formulator:	ConServ Epoxy LLC PO Box 454 Northford, CT 06472 Contact: Paul Marlowe Phone: (203) 484-4123 Fax: (203) 484-2398
Product Name:	ConServ Flexible Epoxy Patch 200 Component C - Filler
Product Use:	Powdered filler component for epoxy patch system.

Physical Data

Ingredients:	Phenol-Formaldehyde Resin Thermoset Microballoons (hollow spheres)
CAS Number:	9003-35-4	Evap. Rate:	n/a
Vapor Density:	n/a	Volatiles Volume:	Max 4.0% moist.
Liquid Density:	n/a	Boiling Point:	n/a
Molecular Weight:	>10,000	Wgt per Gallon:	n/a
Solubility in water:	n/a	Appearance:	red-brown powder
		Odor:	none

Fire & Explosion Hazard Data

Extinguishing Media:	Alcohol-type or all-purpose foam for large fires. Carbon dioxide, dry chemical, or foam for small fires.
Flammability Class	n/a	Autoignition Temp.:	106º +/-5º C (ASTM D 1929)
Fire Equipment:	Wear self contained breathing apparatus during fire fighting.
Fire & Explosion Hazards:	Do not direct solid stream of water or foam into burning molten material; this may cause spattering and spread the fire. Avoid dispersion of dust in air to reduce potential for dust ignition/expplosion. Formaldehyle and phenol vapors may form under fire conditions.

Reactivity Data

Stability:	Stable.
Conditions to Avoid:	None known.
Materials to Avoid:	Strong oxidizing agents, strong acids, halogens, strong alkalies, acyl halides.
Hazardous Decomposition Products:	Burning can produce combustion products: carbon monoxide and dioxide, formaldehyde, and phenol.
Hazardous Polymerization:	None.

Health Hazard Data

Eye Contact:	Excess redness and swelling of the conjunctiva may occur. May cause irritation, experienced as stinging with excess blinking and tear production.
Skin Contact:	Essentially nonirritating to the skin.
Inhalation:	Short term harmful health effects are not expected from vapor generated at ambient temperature.
Ingestion:	No evidence of harmful effects from available information.

Emergency First Aid

Eye Contact:	Flush immeditately with water for at least 15 minutes while lifting upper/lower lids. Get immediate medical attention.
Skin Contact:	Remove contaminated clothing. Wash thoroughly with soap and water.
Inhalation:	Remove person to fresh air. Obtain immediate medical attention.
Ingestion:	No adverse effects or emergency care anticipated by this route of exposure.

Handling Precautions

Ventilation:	Local exhaust recommended. Avoid excessive dispersion of dust into air; may form flammable or explosive mixture. Avoid static discharges or open flame.
Respiratory Protection:	In the absence of proper ventilation wear a respirator approved by NIOSH/MSHA whenever exposed to fumes or vapors. HEPA filter is recommended.
Eye Protection:	Wear approved safety glasses.
Skin Protection:	Use protective plastic gloves.
Protective Clothing:	None required.

Spill and Leak Procedures

In Case of Spill:	Collect for disposal, wear suitable protective clothing.
Waste Disposal:	Landfill where permitted under appropriate local, state, and federal regulations.

Component D - Thickener - M.S.D.S.

ConServ Flexible Epoxy Patch 200
[ Instructions | Technical Data | Specifications | M.S.D.S. ]