Flexible Epoxy Patch 200 - Material Safety Data Sheet

M.S.D.S.

MATERIAL SAFETY DATA SHEET
3/29/94
Flexible Epoxy Patch 200

Product Identification

Formulator:	ConServ Epoxy LLC PO Box 454 Northford, CT 06472 Contact: Paul Marlowe Phone: (203) 484-4123 Fax: (203) 484-2398
Product Name:	ConServ Flexible Epoxy Patch 200 Component A - Epoxy Resin
Product Use:	Adhesive consolidant for decayed wood.

Physical Data

Ingredients:	Polymer of epichlorohydrin and bisphenol A, Alkyl glycidyl ether
Vapor Pressure:	1.4 mm hg @ 80º C	Evap. Rate:	n/a
Vapor Density:	n/a	Volatiles Volume:	0.0%
Liquid Density:	n/a	Boiling Point:	>200º F
Specific Gravity:	1.06 (H₂O = 1.0)	Wgt per Gallon:	9.8 lbs.
Solubility in water:	7.8%	Appearance:	clear liquid
		Odor:	ethereal

Fire & Explosion Hazard Data

Extinguishing Media:	Carbon dioxide, Dry chemical, Foam
Flammability Class	n/a	Flash Point:	300º F PMCC
Fire Equipment:	Wear positive pressure, self contained breathing apparatus during fire fighting. Cool fire-exposed product containers with water.
Fire & Explosion Hazards:	none known

Reactivity Data

Stability:	Avoid amine compounds.
Hazardous Reaction:	Hazardous polymerization will not occur by itself, but masses of more than 1 pound of product plus and aliphatic amine will cause irreversible polymerization and considerable heat buildup.
Conditions to Avoid:	Direct contact with base solutions.
Hazardous Decomposition Products:	By-products expected in incomplete pyrolosis or combustion are mainly phenolics, carbon monoxide, hydrgen chloride, and water. These by-products should be treated as potentially hazardous substances and appropritate precautions should be taken.

Health Hazard Data

Eye Contact:	May cause slight transient eye irritation.
Skin Contact:	Essentially nonirritating to the skin.
Inhalation:	Elevated temperatures may generate vapor levels sufficient to cause eye and respiratory irritation.
Ingestion:	Single dose oral toxicity is low. No hazards anticipated from ingestion incidental to industrial exposure.

Emergency First Aid

Eye Contact:	Flush immeditately with water for at least 15 minutes while lifting upper/lower lids. Get immediate medical attention.
Skin Contact:	Wash thoroughly with soap and water.
Inhalation:	Remove person to fresh air. Obtain immediate medical attention.
Ingestion:	No adverse effects anticipated by this route of exposure.

Handling Precautions

Ventilation:	Local exhaust recommended.
Respiratory Protection:	In the absence of proper ventilation wear a respirator approved by NIOSH/MSHA whenever exposed to fumes or vapors. Organic vapor cartridge with HEPA filter is recommended.
Eye Protection:	Use chemical worker goggles with splash protection or full face mask.
Skin Protection:	Use protective gloves made of nitril rubber or other impervious matter.
Protective Clothing:	Wear chemical resistant apron and or coveralls as required to minimize contact with product.

Spill and Leak Procedures

In Case of Spill:	Soak up in absorbent material such as sand and collect in suitable containers. Residual resin may be removed using steam or hot soapy water. Solvents are NOT recommended. Provide adequate ventilation during clean-up.
Waste Disposal:	Do Not dispose of in sewers, on ground or in water. Contaminated product should be disposed of by a licensed reclaimer, recycler or incinerator in compliance with all local, state and federal regulations.

Component B - Curing Agent - M.S.D.S.

ConServ Flexible Epoxy Patch 200
[ Instructions | Technical Data | Specifications | M.S.D.S. ]